It’s not until later that the performance of a lift-station will be determined. The design is determined by many elements, such as calculation of flow rates, elevation of the site system pressure, water quality, top conditions, access to maintenance, control systems, and future capacity.
Image credit: romtecutilities.com
For project owners comparing the best lift station designers, the more useful question isn’t simply who can specify pumps. The issue isn’t who can specify pumps, but rather, who can translate operating requirements and site conditions into a system that’s practical to construct and operate as well as maintain.
Gravity Has Limits
Gravity is generally the most efficient method to move wastewater however, the terrain and patterns of development can be a challenge. It’s possible that new residential, industrial and commercial properties are too large, far away or located in zones where gravity sewer extension is not possible.
Lift stations provide the required force mechanically for the movement of wastewater to the next stage of the system of collection. The design of a lift station requires an understanding of normal operations in addition to less favourable situations such a peak inflow and maintenance of pumps, breakdowns in equipment, or future increases in demands.
The companies that are deemed to be among the top in the wastewater industry should consider the entire problem of conveyance rather than treating an area as if it were an isolated item.
Existing Infrastructure Complicates the Puzzle
The only problem is not new construction. Many municipalities must upgrade or replace aging stations to ensure that the essential wastewater infrastructure in good working order.
Existing infrastructure, like wet wells and control systems, force mains site boundaries, downstream infrastructure, may limit the design. Engineers will have to determine what is left or replaced, and what must be upgraded, and which new elements are required.
Romtec Utilities works across municipal, private, commercial industrial, retrofit and replacement programs, allowing pumps to be created to meet the unique ownership and operating requirements of each project.
Stormwater follows different rules
The best stormwater system designers should use the provided search terms to resolve an issue with a different hydrologic. Stormwater systems can experience dramatic changes in their volume according to the quantity of rain, drainage area capacities for detention and discharge rates.
For instance, a station that serves a detention area could require the temporary holding of the runoff before pumping it out at a specific speed. Engineers should consider the rate of flow, the conditions of the head, the environmental requirements, the flood-management objectives, and the particulars of the drainage system that is receiving.
Prefabrication is a way to move work from the jobsite
Complex field assembly introduces opportunities for conflicting schedules, installation errors changes, delays. Romtec Utilities performs significant prefabrication of equipment prior to the construction location.
When you complete more assembly and quality assurance work in a controlled environment this can decrease the amount of work required on the ground. Romtec Utilities’ project approach will reduce the amount of time it takes to install certain types of installations.
The process of commissioning is key element in engineering Success
The station can’t be proven just because every component has been put in place. Romtec Utilities offers installation advisors to assist with construction that includes starting up and control panel inspections as well as pump operations, system testing and staff training. The manual also contains information that users are able to refer to when they are maintaining the system, or considering future expansion.
For owners searching for the top lift station designers, that final step deserves consideration. A good engineer should be able to produce more than just a satisfactory set of sketches. The station owner should leave with a system that works, well-trained personnel, helpful documentation, and equipment that is specifically designed to handle the operating conditions of the facility.